A SIMPLE METHOD OF FIXING YOUR REFLECTIVE FOIL INSULATION INTO THE LOFT OF YOUR HOME.

Tools Needed

• scissors
• upholsterers staple gun/ small hammer and wide head tacks.
• tape measure

Preperation and insulation.

• measure the loft area, and work out the lengths required to complete the job ie. 5meter x 3 metere.
• unroll your material on the driveway or garden lawn living room floor, cut two lenghts of 5 meter , roll these up into rolls .
• Take your two rolls up to the loft with staplegun.
• Start at the top "highest point" and work across, staple the material to the rafters.
• Once the first sheet is completed, start with your second roll and overlap by 20mm, the first section of material, staple to rafters, as you would have done with the first section of insulation.
• To finish off seal all joints with Foil Tape.
• You have now completed the first section of your loft,  Rest if required before you repeat the same steps on the next section of your loft.

Additional information: Why insulate? How to insulate? Ventilation Heat
HOW DOES IT WORK?
IN WINTER WITHOUT ISOL-ACTIF® M1 WITH ISOL-ACTIF® M1 Incoming heat is reflected inside the building, instead of being absorbed by the walls. Due to the composition of ISOL-ACTIF® M1 reflecting films, over 90% of the warming rays are released inside your home. IN SUMMER WITHOUT ISOL-ACTIF® M1 WITH ISOL-ACTIF® M1 ISOL-ACTIF® M1offers a double effect as it reflects the heat that builds up under the tiles back outside, thus substantially cooling the house.