TRI-ISO SUPER 9 (1600MM X 12.50 LM=20M2)

Improved interior thermal comfort in summer and winter

Composition and method of fixing ensure that the Tri-Iso Super 9: * during the summer, reflect away the heat of the sun * during the winter, provide better insulation from exterior cold temperatures while conserving the heat generated inside a building

Safe, quick and easy installation

The Tri-Iso Super 9 is safe. It is lightweight, convenient to handle and store, easy to fix without special training or expensive tools.

It is flexible and can insulate any shape or size of space area. It can be cut to size with ordinary scissors. Easy to fix with staples or glue. Unlike some other insulation products, it does not create Health & Safety or breathing problems from dust or fibres either for occupiers or for installers.

Can be continuously fixed to help prevent draughts.

Durability

* Tri-ISO Super 9 is tear-resistant.

* It will not stretch or sag away from fixings.

* It is not affected by humidity, water vapour or damp.

* It will not rot.

* It has no food value for rodents.

* It helps prevent interstitial condensation problems.

* It is chemically and mechanically resistant.

* Protected internal state efficiency for each layer.

Specifications

BENEFITS

* Seal roof against wind and damp, whilst retaining ventilation.

* Retains more warmth in winter.

* Prevents lofts overheating in summer.

* Saves valuable living space.

* Beams and rafters may be left exposed.

SANDWICH COMPOSITION

14 alternating layers:

* 2 tear-resistant reinforced reflective films.

* 2 layers of soft, flexible wadding.

* 6 layers of closed cell foam.

* 4 internal reflective films.

CHARACTERISTICS

* Thickness: 25mm.

* Equivalent to 200mm of traditional thick insulation.

* Fume classification: F1 (NF 16-101)

* Roll size: 1.58m x 10m long = 15.8m2 Weight: 9.5kg

* Roll size: 1.58m x 15m long = 23.7m2 Weight: 13.5kg

APPLICATIONS

* Over / Under rafter.

* Loft conversions.

* Unconverted lofts.

* Walls

Fixing

* To be effective, insulation planning must include roofs, doors, windows, ventilation and flooring above colder areas.

* Overlap each layer of insulation by 50mm and continuously seal along the laps and joins with a good quality foil backed tape to ensure airtightness.

* No special equipment is needed to install the Tri-Iso Super 9, but each piece should be cut neatly to size with scissors and carefully stapled at regular intervals using corrosion resistant staples, minimum size for Tri-Iso Super 9: 14mm

* As far as possible and practical, fix the insulation so as to leave a 20mm airspace either side of the product. This is important so as to ensure any heat exchange is made through radiation.

IMPORTANT: In a warm roof application, an airspace MUST be left between the underlay and the insulation.

* To achieve good thermo-acoustic insulation, use the Tri-Iso in conjunction with a dense insulating material.

* When used in addition to existing insulation the Tri-Iso Super 9 must be installed on the warm side.

* TV aerials: If fixing Tri-Iso Super 9 insulation onto the pitch of a roof, install television aerials outside the house to avoid any risk of interference.